PDA

View Full Version : Looking for a high out put hho



briguy
09-24-2008, 05:10 PM
I need a complete high output hho that does 1 liter per minute or higher. I don't have very much room. So space is a issue. Let me know what you guys have.

mytoyotasucks
09-25-2008, 01:20 PM
I need a complete high output hho that does 1 liter per minute or higher. I don't have very much room. So space is a issue. Let me know what you guys have.

i dont know what is alittle room but u will need at least 3" diameter and 8 - 10 " tall, im running a 4" diam and 10 1/2" tall and getting 1.2 LPM.

but heat is around 150 F

hhoconnection
10-19-2008, 06:19 PM
I sell the EBN 6" x 6" dry cells. They are capable of up to 3 lpm at 40 amps. They run well at 20 amps and put out about 1.5 lpm. You will need a small reservoir for the water in addition to the generator. The assembled cells go for $350 and un-assembled they are $299. Dry cells are the way to go. They are safer, and more efficient. These are the actual EBN cells made by EBN, not a copy. All of their profit goes back into R&D so you are helping to support their cause as well. Here is a link to my checkout page:

http://www.hhoconnection.com/EBN_checkout1.html

There are a lot of videos on YouTube about the EBN dry cells if you are not familiar with them.

JonDoh
10-20-2008, 03:04 AM
I need a complete high output hho that does 1 liter per minute or higher. I don't have very much room. So space is a issue. Let me know what you guys have.

What yr, make, model & engine size is the vehicle?

I've use 3x4 plates in several cars that have given some excellent results.

minsim
10-29-2008, 12:29 AM
I need a complete high output hho that does 1 liter per minute or higher. I don't have very much room. So space is a issue. Let me know what you guys have.

You may found more information from following site.

http://www.aquareactor.com

mytoyotasucks
11-01-2008, 12:13 PM
I need a complete high output hho that does 1 liter per minute or higher. I don't have very much room. So space is a issue. Let me know what you guys have.


have u found one yet ???

abillya
11-01-2008, 09:26 PM
You may found more information from following site.

http://www.aquareactor.com

I have Hydrogen Generators that are capable of producing 1-1/4 to 1-3/4 lpm that consist of nine 20 gauge 316L stainless steel laser cut 2.375" x 5.375" plates spaced at 1-1/2 mm, heavy duty CPVC lids with high temperture neoprene seal, all my kits come with a bubbler, flashback arrestor, 10 gauge wiring with all your terminal connectors butt connectors fuse holder w/fuse, 3/8" liquid gas check valve, 3/8" braided hose w/air intake plenum elbow with nut, a 3/8" barbed tee for vacuum connection, custom machined heavy duty o2 sensor extender, complete instructions and E-Mail support also I can be reached at 607-351-6321 ask for Bill, my website is www.hydro-extra.webs.com

theramsey3
11-19-2008, 04:00 PM
did you get a cell yet?

Super Fuel FX
11-19-2008, 04:57 PM
With all the sellers listing for him, I think that he will need a few weeks to sort through them all...:D

theramsey3
11-19-2008, 06:08 PM
I would strongly recommend a dry cell if you are going to buy instead of build I have sold a few on ebay but due to financial difficulties I haven't been able to get one for myself due to the fact I am still buying everything in small quantitys hopefully soon I will be able to get the start up money I need to pay for the minimum quantity my local sheet metal shop will cut for me its not a bad price but alot more than I have right now not including gaskets and end plates or maybe some one here could get me good prices on laser cut 316L when I get on my feet I will offer a discount for forum members

abillya
11-19-2008, 08:51 PM
What size plates and what hole config would you be looking for?

hydroxmobile
05-09-2009, 01:35 AM
Hydrox Mobile HHo generators produce more gas at lower amps with 2 years product warranty and USD1million product liability insurance. Please find out more at www.hydroxmobile.com

EddieRock
06-01-2009, 10:58 PM
You should be able to get any HHO part you need from here (http://www.gasconversionkits.com/go.php?id=KitsDirect)

He uses only the best products available and they are high quality.

Bob Know his stuff. I ordered a kit from him and I'm REALLY happy with it.

Big Bob
05-15-2010, 09:22 PM
I have some dry cell hydrogen generators available. I've been perfecting this design for years. Any comments would be appreciated. www.bruteforcehho.com

sokeway
11-28-2010, 07:40 AM
We can provide various types of HHO system

lhazleton
11-30-2010, 05:33 PM
Ben,
You forgot to mention that it's a wet cell design that's not only extremely inefficient, the plastic screw-on lids will leak like crazy once the electrolyte overheats from all of the volt leakage.
Good for playing with if you want to make a few bubbles to blow up.
Also, there's no mention of the need for EFIE's, MAF/MAP enhancers,CCPWM's, etc..
And you sure as hell don't hook it up to any vacuum source!

questions
09-09-2011, 10:46 PM
I sell the EBN 6" x 6" dry cells. They are capable of up to 3 lpm at 40 amps. They run well at 20 amps and put out about 1.5 lpm. You will need a small reservoir for the water in addition to the generator. The assembled cells go for $350 and un-assembled they are $299. Dry cells are the way to go. They are safer, and more efficient. These are the actual EBN cells made by EBN, not a copy. All of their profit goes back into R&D so you are helping to support their cause as well. Here is a link to my checkout page:

http://www.hhoconnection.com/EBN_checkout1.html

There are a lot of videos on YouTube about the EBN dry cells if you are not familiar with them.

can this be put in a car? does it work to increase mileage? any chance to explode? is it dangerous? can it be used in below freezing?

BioFarmer93
09-10-2011, 12:46 AM
1. Yes
2. yes
3. a very remote one
4. if mis-handled
5. yes.

BassLyneUK
01-10-2013, 11:24 AM
Hi there,

I have been researching and working with HHO technologies and have made several deals with lots of different companies.

The one I recommend as the best by far was a company called HHO kits direct. They offered the best prices without a doubt and have massive sale cuts on everything.

Here is a link to their website:

http://www.hhokitsdirect.com/HHO-Generators.php (http://www.1shoppingcart.com/app/?af=1511637)

They do 3 different types of products: a small generator, a medium and a large and are all the best prices anywhere for what they give!

They offered me the best prices anywhere on the web and I have bought lots of generators for friends and other people from their website.

Hope that helps,

Louis