Need a supplier for dry cells!

[jcbarton]

I want to switch to a dry cell and need a supplier who is honest, reliable and reasonable. I have these put on mainly smaller older foreign cars and trucks. I need something that produces around 1lpm-1.5lpm but does not overload the alternator, maybe max20-25 amps. Anybody have any suggestions or would like to make a little extra money?? Thanks,

[Gary Diamond]

There will be a Amoeba Cell soon, Ask Stu

[jcbarton]

Hey Stu. I was told that you have a dry cell, I believe that it is called the "amoeba"? I am looking for a dry cell fabicator/supplier. Are you interested? Thanks

[John Sargent]

I want to switch to a dry cell and need a supplier who is honest, reliable and reasonable. I have these put on mainly smaller older foreign cars and trucks. I need something that produces around 1lpm-1.5lpm but does not overload the alternator, maybe max20-25 amps. Anybody have any suggestions or would like to make a little extra money?? Thanks,

I bought several different size dry cells from ebay, hydrogas labs, guy simmons in Minnesota. High quality, well made, with support as needed and good delivery times. Been very happy with them. Link to his store:

http://stores.shop.ebay.com/HydroGas-Labs__W0QQ_armrsZ1

Hope this helps.
John

[Gary Diamond]

I bought several different size dry cells from ebay, hydrogas labs, guy simmons in Minnesota. High quality, well made, with support as needed and good delivery times. Been very happy with them. Link to his store:

http://stores.shop.ebay.com/HydroGas-Labs__W0QQ_armrsZ1

Hope this helps.
John

I looked at it, what kind of current drain does it use? I didn't see anything on it

It always boils down to how much energy did it take to make that much HHO so you save some gas but you load down your motor to the point were your using more gas and you can burn out your electrical charging system
Gary

[hhoconnection]

I have EBN dry cells for sale. 6 x 6 inch, 21 plates, 316L laser cut, and will put out 1.5 LPM at 20-25 amps. $299.

http://www.hhoconnection.com/EBN_checkout1.html

[Gary Diamond]

I have EBN dry cells for sale. 6 x 6 inch, 21 plates, 316L laser cut, and will put out 1.5 LPM at 20-25 amps. $299.

http://www.hhoconnection.com/EBN_checkout1.html

Nice job on the web site

Gary

[NightOfDarkness]

Please check our website at www.gidragen.com

We can supply you with as many DryCells as you want $160 for 21 plate 316L 100% 6x6

if you order Qty. price will drop down to $120 each check Distributor link on the site

Thanks

[jericoriver]

The links on your site don't work for viewing the dry cells.

[NightOfDarkness]

yes, not yet posted it, soon though

check back next week

site is in the making

[jericoriver]

yes, not yet posted it, soon though

check back next week

site is in the making

I read this on your site.QUOTE: {Having a 6x6 Dry Cell and running at 15Amps will produce 2 LPM and having an 8x8 Dry Cell running at 15Amps will also produce 2 LPM} Is that what you are saying your cell puts out?

[HHO BLASTER]

Please check our website at www.gidragen.com

We can supply you with as many DryCells as you want $160 for 21 plate 316L 100% 6x6

if you order Qty. price will drop down to $120 each check Distributor link on the site

Thanks

How thick are your plates?

[NightOfDarkness]

The usual 0.8mm = to 19guage

[NightOfDarkness]

buy one and test it yourself i am not saying anything, different measurements coming from different people.

That was an example

[godfish]

Please check our website at www.gidragen.com

We can supply you with as many DryCells as you want $160 for 21 plate 316L 100% 6x6

if you order Qty. price will drop down to $120 each check Distributor link on the site

Thanks

Crap I wish I would have seen your site before I tried to make one.

[NightOfDarkness]

Well it's never to late to invest $160

Besides, the word tried, was it completed? I think it will cost you lot more than $160 to make it yourself.

[NightOfDarkness]

How thick are your plates?

0.6mm = 22 gauge
0.7mm = 21 gauge
0.8mm = 20 gauge <-- our's
0.9mm = 19 gauge
1.0mm = 18 gauge.

[HHO BLASTER]

0.6mm = 22 gauge
0.7mm = 21 gauge
0.8mm = 20 gauge <-- our's
0.9mm = 19 gauge
1.0mm = 18 gauge.



http://www.hauserandmiller.com/reference/fractions.html

[wisdav]

JCBARTON
HI, you want a good drycell,try hooters hydrogen .com
iv'e gotten 3 cells , 19,21 and 31 plate systems. all work
great,i don't work for them , but he has good stuff.
also he is a great guy to talk to.
tell him dave sent you.:)

[jericoriver]

buy one and test it yourself i am not saying anything, different measurements coming from different people.

That was an example

You are A real whiz at PR.

[hydroxmobile]

Hi All,
We are looking for distributors who are interested in marketing Hydrox Mobile X-Cell in their own countries. Please goto www.hydroxmobile.com

[ecazdi]

I bought several different size dry cells from ebay, hydrogas labs, guy simmons in Minnesota. High quality, well made, with support as needed and good delivery times. Been very happy with them. Link to his store:

http://stores.shop.ebay.com/HydroGas-Labs__W0QQ_armrsZ1

Hope this helps.
John

John, do you have the email of Hydrogas Labs guys?
Thanks,
Ernie

[ecazdi]

John S:
Can you share the email of Guy Simmons from hydrolabs from Minnesota?
Thanks,
Ernie

[Big Bob]

I have some dry cell hydrogen generators available. I've been perfecting this design for years. Any comments would be appreciated. www.bruteforcehho.com

[Big Bob]

I have some dry cell hydrogen generators available. I've been perfecting this design for years. Any comments would be appreciated. www.bruteforcehho.com