I need a complete high output hho that does 1 liter per minute or higher. I don't have very much room. So space is a issue. Let me know what you guys have.
Printable View
I need a complete high output hho that does 1 liter per minute or higher. I don't have very much room. So space is a issue. Let me know what you guys have.
i dont know what is alittle room but u will need at least 3" diameter and 8 - 10 " tall, im running a 4" diam and 10 1/2" tall and getting 1.2 LPM.Quote:
Originally Posted by briguy
but heat is around 150 F
I sell the EBN 6" x 6" dry cells. They are capable of up to 3 lpm at 40 amps. They run well at 20 amps and put out about 1.5 lpm. You will need a small reservoir for the water in addition to the generator. The assembled cells go for $350 and un-assembled they are $299. Dry cells are the way to go. They are safer, and more efficient. These are the actual EBN cells made by EBN, not a copy. All of their profit goes back into R&D so you are helping to support their cause as well. Here is a link to my checkout page:
http://www.hhoconnection.com/EBN_checkout1.html
There are a lot of videos on YouTube about the EBN dry cells if you are not familiar with them.
What yr, make, model & engine size is the vehicle?Quote:
Originally Posted by briguy
I've use 3x4 plates in several cars that have given some excellent results.
You may found more information from following site.Quote:
Originally Posted by briguy
http://www.aquareactor.com
Quote:
Originally Posted by briguy
have u found one yet ???
I have Hydrogen Generators that are capable of producing 1-1/4 to 1-3/4 lpm that consist of nine 20 gauge 316L stainless steel laser cut 2.375" x 5.375" plates spaced at 1-1/2 mm, heavy duty CPVC lids with high temperture neoprene seal, all my kits come with a bubbler, flashback arrestor, 10 gauge wiring with all your terminal connectors butt connectors fuse holder w/fuse, 3/8" liquid gas check valve, 3/8" braided hose w/air intake plenum elbow with nut, a 3/8" barbed tee for vacuum connection, custom machined heavy duty o2 sensor extender, complete instructions and E-Mail support also I can be reached at 607-351-6321 ask for Bill, my website is www.hydro-extra.webs.comQuote:
Originally Posted by minsim
did you get a cell yet?
With all the sellers listing for him, I think that he will need a few weeks to sort through them all...:D
I would strongly recommend a dry cell if you are going to buy instead of build I have sold a few on ebay but due to financial difficulties I haven't been able to get one for myself due to the fact I am still buying everything in small quantitys hopefully soon I will be able to get the start up money I need to pay for the minimum quantity my local sheet metal shop will cut for me its not a bad price but alot more than I have right now not including gaskets and end plates or maybe some one here could get me good prices on laser cut 316L when I get on my feet I will offer a discount for forum members
What size plates and what hole config would you be looking for?
Hydrox Mobile HHo generators produce more gas at lower amps with 2 years product warranty and USD1million product liability insurance. Please find out more at www.hydroxmobile.com
You should be able to get any HHO part you need from here
He uses only the best products available and they are high quality.
Bob Know his stuff. I ordered a kit from him and I'm REALLY happy with it.
I have some dry cell hydrogen generators available. I've been perfecting this design for years. Any comments would be appreciated. www.bruteforcehho.com
We can provide various types of HHO system
Ben,
You forgot to mention that it's a wet cell design that's not only extremely inefficient, the plastic screw-on lids will leak like crazy once the electrolyte overheats from all of the volt leakage.
Good for playing with if you want to make a few bubbles to blow up.
Also, there's no mention of the need for EFIE's, MAF/MAP enhancers,CCPWM's, etc..
And you sure as hell don't hook it up to any vacuum source!
can this be put in a car? does it work to increase mileage? any chance to explode? is it dangerous? can it be used in below freezing?Quote:
Originally Posted by hhoconnection
1. Yes
2. yes
3. a very remote one
4. if mis-handled
5. yes.
Hi there,
I have been researching and working with HHO technologies and have made several deals with lots of different companies.
The one I recommend as the best by far was a company called HHO kits direct. They offered the best prices without a doubt and have massive sale cuts on everything.
Here is a link to their website:
http://www.hhokitsdirect.com/HHO-Generators.php
They do 3 different types of products: a small generator, a medium and a large and are all the best prices anywhere for what they give!
They offered me the best prices anywhere on the web and I have bought lots of generators for friends and other people from their website.
Hope that helps,
Louis