Valeed this link has pretty much everything you need:
http://www.panaceauniversity.org/Hydroxy%20Boosters.pdf
Type: Posts; User: hg2
Valeed this link has pretty much everything you need:
http://www.panaceauniversity.org/Hydroxy%20Boosters.pdf
Then you've come to the right place to get started.
Welcome to the forum!
Rexstar I wouldn't buy from them for one main reason is that they are in Portugal.I'm not sure where you're located,but if you have any issues with them you'll be hard pressed to get your money back...
Do mean something like this OZZIE?All this and more can be found here:http://www.panaceauniversity.org/Hydroxy%20Boosters.pdf
Q-What is a hydroxy booster?
A-The Term” hydroxy booster” describes...
What you're proposing is a great idea,but unfortunately no one to date has achieved "over-unity"In other words you can't get back more than you put in.
According to:http://www.panaceauniversity.org/Hydroxy%20Boosters.pdf
On page 329
1 US gallon of water = 1860 gallons of HHO gas.
Also most of your HHO questions can be answered on the Panacea...
I'm not 100 % sure it seems I read where much pressure will slow(and possibly prevent) the Hydroxy bubbles from forming.I'll try to do some research and see what I can come up with.
I never had any luck on my 05 Dodge ram with MAF enhancer,but the EFIE did ok once dialed in.
Dobbs quite a few of us have used cutting boards from Walmart at one time or another and I can't recall any problems using them.Have you looked in the phone book under "plastics" yet?That's where I...
The problem with gas production with hot water is that eventually you end up generating more steam than HHO.I've found that "most" dry cell designs run around 100*F to 150*F and the cooler you can...
The pump was a continuous duty pump and had no by-pass that I'm aware of,I had wired to run when the truck was started.It's used for marine galley faucets to run whenever the faucet is turned on at...
I used a pump on my 5 LPM dry cell system I built because I had a problem with the e-lyte pumping out of the large dry cell so fast that the gravity feed couldn't keep up causing lower LPM output.The...
BeaverRat you might try to make the output fittings larger and route them up from the cell at 90 degrees,this will prevent the e lyte being expelled as much and allow the gas to flow easier.Smaller...
Hi fellow members,
I recently joined a new forum that needs fresh ideas and new members.It's about home efficiency and energy saving mainly with homes.There is an HHO section along with many other...
Helz
I never went back to 8 plates after refitting the cell with 1/16" gaskets last winter because I got the output I was looking for after the refit.I can tell you that with the 1/8" thick...
Ok Phill I see which way you're going with this now,I guess I missed the add-on part somewhere.Interesting concept though I'd like to see some future data on it when you have some available.
That's funny you mention that Phill,
Shane Jackson said he ruined a good screwdriver testing mine and the 2 built in mosfets held fast with no problem.Shane said that was at around 130 amps if I...
Phill
I never saw the feed back you mentioned only a steady amp draw no matter what stage of start up or warmed up the cell was in.That was the goal I was looking for that was total control of...
I gotta throw my 2 coppers in here because I think you guys are off base regarding a PWM's true function with an HHO system.
Back in Jan. of 09 I refitted my large dry cell with 1/16" spacer...
Boltazar
Here's a link that you can start your own private group with no interferences and joining is by invitation only.
http://hhoinfo.ning.com/
Hey benben01 save yourself some grief and lose the O2s extenders,they don't work and are nothing but a waste of time and good for nothing but setting codes.
If you're not comfortable with...
Ericnickel
To use that weak a ratio of e-lyte they have to be using a wet cell set up such as a smack design.
You must have a wet cell design Gashead,they require much less e-lyte than dry cells.
Roland
I think you may be off by a few lbs. on your 28% KOH to water ratio.This measurement is by weight and water weighs about 8.33 lbs per US gallon. therefore it takes about 2 1/2 lbs. of KOH...
Nope my plates haven't changed in a year and a half.Top shelf 316L