Search:

Type: Posts; User: thedore

Page 1 of 2 1 2

Search: Search took 0.01 seconds.

  1. Replies
    2
    Views
    3,302

    For me the Scan Gauge 2 is fine. The two...

    For me the Scan Gauge 2 is fine. The two interesting things are reduced fuel economy when the engine is cold and the mpg seems to vary with weather.
  2. Replies
    2
    Views
    3,302

    Instrumentation

    My suggestion for a topic is instrumentation. From my experience using a scan gauge 2 I have found that until the engine warms up the millage is poor regardless of HHO ( although it may be...
  3. I get lots of weird results. First reason seems...

    I get lots of weird results. First reason seems to be poor fuel economy when engine is cold. I usually reset the scan gauge 2 to solve this. Second is I think weather plays a part in fuel...
  4. also2

    Here are pictures
    http://www.maverickexperiments.com/hho/Building_an_HHO_Generator.html

    millage from 30 mpg to 35 mpg
  5. also

    I considered moving the battery but you need heavy wire and if it should chaff on the metal There would be a high current short circuit. It would probably start a fire and destroy the car. ...
  6. Trunk mounted

    Mine is in the trunk. It is not ideal but there are too many other variables to deal with. I run 1/4 copper tubing into the engine compartment. There is a bubbler in the trunk also. ...
  7. Replies
    1
    Views
    990

    MPG without HHO

    I've been running a 1 LPM unit for many months. I get better milage and the engine runs much smoother. The only problem is that when I shut down the unit and expect the MPG to return to the old...
  8. Thread: Scan Gauge 2

    by thedore
    Replies
    0
    Views
    748

    Scan Gauge 2

    I have been using a 1 LPM unit for a while now. To me it seems the use of HHO improves the engine perhaps by burning carbon deposits and that it runs much better even after I turn off the HHO. The...
  9. Thread: humidity

    by thedore
    Replies
    2
    Views
    1,069

    humidity

    I have a 1 LPM unit and have noticed that it seems to work better when the humidity is high. My next step is to replace the HHO unit with a ultrasonic humidifier to add humidity to the engine. ...
  10. Replies
    3
    Views
    2,939

    It would be interesting to know how much...

    It would be interesting to know how much electricity it uses. Does it plug in with a 115 volt plug or is it 220 volts. It should have a nameplate listing amps or watts if you still have access...
  11. There are enough problems in getting a reasonable...

    There are enough problems in getting a reasonable amount of HHO in the first place without a huge battery draw. This has to be done first before the volume is reduced to match the RPM.
  12. Replies
    0
    Views
    1,761

    Alternative Approach

    There is another way to limit the current draw. This is to use the non linear characteristic of light bulbs. The problem is that to get the 20 amps you need 8 dual filament automotive headlight...
  13. Replies
    13
    Views
    3,115

    Most meters have a 0 to 200 mv volt range. This...

    Most meters have a 0 to 200 mv volt range. This can be used with a shunt like this one ...
  14. Replies
    0
    Views
    999

    Spiral plates results

    I've been using a HHO generator with 4 spiral plate cells in series with 8 headlight bulbs. Results are that I get about 1 liter per minute and from 15% to 20% better gas milage. It seems to...
  15. Replies
    53
    Views
    9,337

    I think you need a cell that has much less excess...

    I think you need a cell that has much less excess electrolyte around the plates. The dry cell you are trying to build suffers from short circuit currents through extra electrolyte. The cell...
  16. Replies
    6
    Views
    1,547

    My unit is in the trunk. 2 wires are connected...

    My unit is in the trunk. 2 wires are connected directly to the battery. The positive one has 2 30 amp fuses in parallel going into it. The wires run out the hood along the sill and into...
  17. Thread: Flow meters

    by thedore
    Replies
    8
    Views
    5,004

    True but it should be easy to calberate one.

    True but it should be easy to calberate one.
  18. Thread: spirial plates

    by thedore
    Replies
    0
    Views
    1,172

    spirial plates

    After a long time I have a working system. I used plates wound in a spirial and described here:

    http://www.maverickexperiments.com/

    It looks like I am getting 10 to 20 percent increase in...
  19. Thread: Flow meters

    by thedore
    Replies
    8
    Views
    5,004

    Check this flowmeter out. ...

    Check this flowmeter out.

    http://sitesearch.jrsmedical.com/results.php?keywords=flowmeter
  20. Replies
    8
    Views
    3,105

    Things I learned the hard way.

    The biggest thing I learned was if you put 2 plates in an electrolyite HHO is produced. No problem. Then if you put 2 or 3 or 4 pairs of plates in an electrolyte and expect to get 2 or 3 or 4...
  21. Replies
    10
    Views
    2,070

    I used PVC pipe with a end cap glued on the...

    I used PVC pipe with a end cap glued on the bottom and a rubber cap held on with a hose clamp on the top. It is described here:
    http://www.maverickexperiments.com/

    The rubber cap on top serves...
  22. Replies
    2
    Views
    1,465

    If the output goes up with the charger connected...

    If the output goes up with the charger connected the input voltage is going from 12 to 14 volts. If this makes a big difference i would go back to a 4N setup.
  23. Thread: 97 Saab 900

    by thedore
    Replies
    0
    Views
    1,648

    97 Saab 900

    My saab has this built in mpg meter. It's one mode of a temperture readout and works well as i can zero it then zero the oddometer and go x miles and read the mpg. It seems to go from 26mpg...
  24. Thread: Its stopped

    by thedore
    Replies
    2
    Views
    1,014

    Same thing happened to me. It seemed it got...

    Same thing happened to me. It seemed it got hot first and then stopped working. I threw out the electrolyte, let the plates dry off for a while , and made new 1% KOH then it started...
  25. Thread: Bmw 7

    by thedore
    Replies
    3
    Views
    8,508

    try this one ...

    try this one

    http://www.spiegel.de/international/spiegel/0,1518,448648,00.html
Results 1 to 25 of 50
Page 1 of 2 1 2