That sounds like a good idea. Lol. I'll have to figure out exactly what I need in terms of output, then find a cell plan and power source to best match. The fine tuning and doing the math and...
Type: Posts; User: cpaiin
That sounds like a good idea. Lol. I'll have to figure out exactly what I need in terms of output, then find a cell plan and power source to best match. The fine tuning and doing the math and...
Of course if I remove 2 of the plates, it will draw less amps, but I could add more KOH to make up for it. Does my estimate on the last post look about right? Another side question, is the reason I'm...
So 50 amps should be well under the max amount of amps, correct? I'll search around to learn more. Here's my math: with 7 plates at about 25 square inches per plate side, that allows ~12.5 amps per...
Would 50 amps be too much for only 7 plates?
I have a 9-plate dry cell, with plates cut to 6x6 inches and with about 1/2 inch gaskets for each side, making about 25 square inches of sanded highest grade stainless steel plate per side. Whew,...
Wow, the Teflon/superglue setup worked! Go figure. It probably won't last forever so I'll still have to cut a few more new plates eventually. But now my bubbler is leaking from the nozzle...
Yeah, I must have buried it a little too far.
@Havens78 Count me in for that ;)
I've been trying a combination of Goop (fully dried), then superglue and teflon wrapped around that while the...
I used the tap, put some goop around the nozzle and screwed it in, then applied a bit more goop to the outside. still leaked a bit.
Do you use teflon around the nozzle?
I've now reapplied the...
I think the tap is my new favorite tool :)
(and after trying to drill straight down in to the plastic plates with a hand drill, I hope everyone out there is aware of how nice it is to have a drill...
Being skeptical, my best guess is that the water exceeded 212 Degrees Fahrenheit causing the water to instantly turn into steam. That could have spiked the pressure. Do you have a temperature gauge...
is this what a tap should look like?
Thanks, learning this might honestly be one of the most helpful fixes that I have needed in awhile. Leaky HHO cells are the WORST
I apologize for my stupidity, but thank-you very much :)
(it was not a joke, i did not know those things existed; you have helped me in defeating my ignorance!)
Pictures of any of your systems would also help.
My main concern is securely attaching the nozzle to the plastic plates while taking up minimal space and trying to avoid glues. (unless you know...
Hey all! I'm having problems with my hho dry cell, in attaching the nozzle to the cell (the connection is a threaded nozzle on one end and barbed on the other). The threaded side goes onto the cell...
Wait, what would that diaphram be made of? If there's any kind of metal on it, then hydrogen will start to be made on the oxygen side (or maybe vise versa), since the diaphram will 'act' as another...
I've seen this done a few times also. It seems like a fair test with one exception, but I'll explain that later. There is another way i've seen to test lpm and thats with some kind of lpm airflow...
hahaha that's great. thinking about it, i might have seen a mythbusters where they made hydrogen from aluminum and a 'secret ingredient.' I guess that ingredient is KOH. Any chance the funnel is...
Hey guys. Would you know if there is reaction with KOH dissolved in water and aluminum? I have a metal funnel and started noticing some white bubbling. The funnel does have some corrosion from...
Not too sure about reservoir size, but I guess as long as it fits where you want to put it, and it doesn't let the liquid go anywhere it shouldn't.
As for the measure of HHO gas to water, I've heard...
It's possible to do, but i'm not sure if this exact one is legit.
In order to completely and perfectly separate the O from the H, there has to be a membrane in between the two cathodes. I'm not...
What is your electrolyte? (ex: KOH, Baking soda, salt) Do you use distilled water or tap water?
These are the two things that would seem to be the biggest (if not the only) factors.
(But I'm not...
Good News!! I got it up and working! Seemed to making a good amount of HHO. Ran it at just under 15 Amps.
Bad News!! It seems that my metal barbs were touching the metal plates, and the glue...
Just got the gorilla glue on there the other day. It's really odd how it drys! All full of bubbles, and it really expands. I put some of the rubbery silicone around the gorilla glue, so hopefully...
One more thing. I'm trying to attach my nozzles onto my plastic plate housing. The hole I drilled is a bit too large, so I'm thinking of using some sort of glue. I first tried silicone, but that...