Search:

Hey i dunno if you posted the right movie but all it is showing is the bubbler in action. No cell is shown.:confused:

Honestly phill i dont know the difference, im new the whole electrical thing and i know some of you out there on this forum have a solid understanding of electrical workings, thats why i have turned...

I tried hooking it up the way you have shown. With just the amp meter on and no power to the cell i am getting a reading of 4 amp... as soon as i turn the cell on via my PWM(30 amp PWM) the amp meter...

The link has the actual Efie that i have. so i currently have 12v+, ground, wire from the O2 sensor, wire to the computer. Just want to make sure that this is the right way that it should be hooked...

Shane is that how it is suppose to be wired? If so ill try it out.

If you dont know by now ill let you in on some valuable information. Just becasue they say something about an item on eBay doesnt make it true, alot of the people selling things on there are only...

The attached document show how i have my ampmeter currently hooked up but it has some weird readings. With the car off but the cell is on the meter will first read low somewhere around 3-4 amps but...

Im getting around 2.9-3.2 volts and it fluctuates at both idle and when the rpms go up. So would this be the right wire. I have heard that certain dodge vehicles have higher voltage for the O2 signal...

this makes sense but what should I do with the positive side of the shunt?

Well seeing how there are parts in this radiatior tat are aluminum then i dont think it would be a wise investment as I am 99.9% sure that KOH will eat aluminum. Also as i have seen it said in many...

Shane, thanks for the speedy reply. I have attached a document that shows how my shunt is wired up. sorry for the art document but the digital camera is acting up currently, but i think it still...

Hi all. I have a 2003 dode neon 2.0 liter 4 cylinder. I am trying to wire up my efie today and i am having a little trouble trying to decode the numbers that i am reading. Also the O2 sensor has 4...

Hi all. I am having a problem try to measure the amps to my cell. I have to different amp meters. One is wired into teh car which i wanted to use on a permant basis. It is 100Amp DC meter. when i...

Well first i would like to say hello and welcome to the world of hho. To keep this short and to answer your questions.
1. there may be some instances where you would not have to modify the ECU to...

Also my opinion is the same as the other plate>netting. But i just wanted to add in the fact that the plates will give you way more surface area to produce gas than the netting would.

The only problem that i can see after a quick look at your design would be an airlock issue with the plates with the flow holes on the bottom. Unless there would be another way for the HHO gases to...

On the topic of where to inject HHO there seems to be a number of different places that people will inject and depending on who you ask you will probably get different answers. But there is a really...

Well it looks like things are slowly but surely heading in the right direction. If its holding water that a huge step forward. With the issue with your plates may be that the electrolyte may not be...

I see in your avatar that it looks like you got your bowl cell put together. Is it up and running or is it still a work in progress?

With a quick search on google i could not readily find anywhere that mentioned that vinegar would even corrode or harm SS or aluminum. I did find that its a good rust remover :p. But i would much...

I dont think painting the sensor would be good for you or the car in the long run. If you paint the O2 sensor the car will most likely think that its faulty and you will throw a CEL and you will have...

I have to agree with Biofarmer93. I would have to say that the 2 bubblers with water would be your best bet to get most of the KOH out before it gets to the engine. A bubbler filled with 28% KOH is...

Oh and i think the general thought process is 5N plates as that gets you right into the 2 volt per plate ballpark. 6N plates would make you have a lower voltage per plate.

Well the first point you mentioned about shorting out looks like the biggest hurdle to overcome. I personally dont like nylon bolts, but with your current design they may have to be used. The...

WOW is all i have to say:p. that is what i call thinking outside the box. I love the ingenuity. That is gonna have a lot of surface area to work with once you get it up and running. I would love to...