KOH is used in the manufacture of soap or biodiesel google is your friend search for local supplyers :D
Type: Posts; User: cully
KOH is used in the manufacture of soap or biodiesel google is your friend search for local supplyers :D
each of my diode bridges are rated @ 35amp 100v thats why im using 2 parelleled they are plastic encapsulated modules
http://img.photobucket.com/albums/v159/cully/hho/transpic.jpg
well heres my transformer it has twin secondaries each 4mm solid core
each winding has its own 36MB100A bridge rectifier which is...
on a side note here
i would wind the secondary with transformer winding wire, not pvc or braided insulated cable as the transformer will run so hot it will melt pvc insulation,
i have been...
that depends on if the car is fitted with a recirculating dump valve or a dump valve that vents to atmosphere
its quite common for the "boy racers" to fit the latter as that suppose to sound...
on the board of the meter there is a 7805 already i also fitted a 7810 and still fryed the amp meter ic chip
this is an untested thought ! but might be worth a try
put your shunt in the 0 volt side of the cell you should only get a max of 75mv across the chip
i have not tested this idea on your head...
yes you are correct ! i have had the same issue with the cheep Chinese amp meters from ebay the only way around it is to power the meter via a 9v alkaline battery so its isolated from the voltage...
i would say anything you want to hear for his wages too !!!!!
there was some good lines in there though :D
don't mess with the WRX they are prone to melting pistons if you run poor quality fuel,
I'm talking now from a UK view point on the Japan imported versions to the UK these run high octane fuel as...
maybe not petrol
but why not
thin oil or brake fluid that even absorbs moisture
well........
you know your addicted to this HHO stuff when all the offcuts in the shed turn out to be used stainless plates
well I'm addicted not by the fact of its big bangs
as i have stopped...
the ecu will be switching the alternator on via a switch which will be equivalent to the ignition switch in the circuit i have drawn (the dash lamp is not iluminated with the trigger wire switched...
i had a similar problem with my diesel
i had no fuel pump relay to trigger the cell when the engine is running
so i installed this simple circuit
it basically switches on a relay only when the...
one warning with high temps under the hood
on parking up the fuel in your fuel rail will evaporate and may cause air locks in the fueling system
in the UK we had a car cant remember which make...
check out here http://en.wikipedia.org/wiki/Mass_flow_sensor
you also get a cold wire sensor The sensor is part of an oscillator circuit whose oscillation frequency changes with sensor inductance
I'm still experimenting with my cell i have had gains with the cell
see the "efficiency math" thread
i want to build a bubbler cleanser that removes the KOH carry over before finally installing...
Stu to link from another web site you need to host your pictures
somewhere like..
i use http://photobucket.com/
you can edit then save it also gives you the correct tags to use on forums
...
just had a brain fart.....
had to stop my mpg run cause my bubbler had frozen
different peeps say add different things
my thought is why not use diesel as a bubbler liquid as it has a winter...
Russ i cant get it no closer to the turbo as the car has not got one ;)
you say not bad for a first attempt...
its my 3rd cell but bench testing shut down the other 2,
this 3rd one is the...
yes painless
thats why i stated
UK 1 Gallon = 4.5 Ltrs
but does the math look right or am i doing the calc wrong?
please can someones check this math
I'm trying to work out my cell % gain
remember I'm in the UK 1 Gallon = 4.5 Ltrs
i need MPG for running on HHO
miles run= 145. Ltrs used= 12Ltrs
ltrs to...
you have probably fryed your meter by connecting the meter across the load set to Amps .as you have dead shorted your supply line.
check to see if you have any fuses left in the meter or meter...
what power supply are you using ?
i ask the question because in your second test
the voltage has reduced and the current has also
normally if the cell voltage decreases the current goes up...
Stu i will put money on yours is more efficient .
i reckon the smack is producing steam !!
my reason for this assumption is.....
the smack does not circulate the electrolyte so his plates will...