Now that Ive built my first cell/unit, im getting ready to make it road ready but Im a PWM dummy. The cell is 2 sequential "smack" cellls, they are a little different than the smack but similar. For this unit I am equipping it with 2 simple 30a Pwms ordered off fleabay. But for my other unit I am working on I want to use a high accuracy PWM with precise frequency tuning, the problem with building one is i am a dummy, I am a freshmen in the electrical engineering program Is there anyone out there that would be willing to talk to me about what I have to do, or would anyone be willing to help assemble my board if i buy the parts? I have big ideas in mind for my unit, but I need some help and dont really have time to take to learn all the PWM / Microelectronics. Honestly, If someone could explain to me in simple english i could probably do all the assembly
Now I know the first thing is choosing my circuit, and to answer that question I have to know what features I want. I want all the frequency and waveform controls I can have, also want current limiting and so on...
This cell is capable of carrying well over 200A constant by using the .5A per sq in of + surface area. And I intend to use as much current as I can. The cell is constructed of a SS Tank and SS cell, however im sure 200a constant would overheat it
I also am going to build a dry graphite cell and will want the same deal with that at less Amps, maybe 50 or 60 amp pulsed
My intentions are to achieve resonance, I have read a fair deal on it and believe it is going to be difficult put possible
Can anybody help?