Page 1 of 2 12 LastLast
Results 1 to 10 of 19

Thread: Looking for a high out put hho

  1. #1
    briguy Guest

    Looking for a high out put hho

    I need a complete high output hho that does 1 liter per minute or higher. I don't have very much room. So space is a issue. Let me know what you guys have.

  2. #2
    Join Date
    Aug 2008
    Location
    Southern Alberta Canada
    Posts
    483
    Quote Originally Posted by briguy View Post
    I need a complete high output hho that does 1 liter per minute or higher. I don't have very much room. So space is a issue. Let me know what you guys have.
    i dont know what is alittle room but u will need at least 3" diameter and 8 - 10 " tall, im running a 4" diam and 10 1/2" tall and getting 1.2 LPM.

    but heat is around 150 F
    Come to the Darkside - We have Cookies
    And lots of KOH (16 LBS)

    Not currently running HHO.
    I dont run HHO during winter.

  3. #3
    Join Date
    Jul 2008
    Location
    Paso Robles, CA
    Posts
    202
    I sell the EBN 6" x 6" dry cells. They are capable of up to 3 lpm at 40 amps. They run well at 20 amps and put out about 1.5 lpm. You will need a small reservoir for the water in addition to the generator. The assembled cells go for $350 and un-assembled they are $299. Dry cells are the way to go. They are safer, and more efficient. These are the actual EBN cells made by EBN, not a copy. All of their profit goes back into R&D so you are helping to support their cause as well. Here is a link to my checkout page:

    http://www.hhoconnection.com/EBN_checkout1.html

    There are a lot of videos on YouTube about the EBN dry cells if you are not familiar with them.

  4. #4
    JonDoh Guest
    Quote Originally Posted by briguy View Post
    I need a complete high output hho that does 1 liter per minute or higher. I don't have very much room. So space is a issue. Let me know what you guys have.
    What yr, make, model & engine size is the vehicle?

    I've use 3x4 plates in several cars that have given some excellent results.

  5. #5
    Quote Originally Posted by briguy View Post
    I need a complete high output hho that does 1 liter per minute or higher. I don't have very much room. So space is a issue. Let me know what you guys have.
    You may found more information from following site.

    http://www.aquareactor.com

  6. #6
    Join Date
    Aug 2008
    Location
    Southern Alberta Canada
    Posts
    483
    Quote Originally Posted by briguy View Post
    I need a complete high output hho that does 1 liter per minute or higher. I don't have very much room. So space is a issue. Let me know what you guys have.

    have u found one yet ???
    Come to the Darkside - We have Cookies
    And lots of KOH (16 LBS)

    Not currently running HHO.
    I dont run HHO during winter.

  7. #7
    Join Date
    Sep 2008
    Posts
    11

    Hydrogen Generator with heavy duty CPVC lids

    Quote Originally Posted by minsim View Post
    You may found more information from following site.

    http://www.aquareactor.com
    I have Hydrogen Generators that are capable of producing 1-1/4 to 1-3/4 lpm that consist of nine 20 gauge 316L stainless steel laser cut 2.375" x 5.375" plates spaced at 1-1/2 mm, heavy duty CPVC lids with high temperture neoprene seal, all my kits come with a bubbler, flashback arrestor, 10 gauge wiring with all your terminal connectors butt connectors fuse holder w/fuse, 3/8" liquid gas check valve, 3/8" braided hose w/air intake plenum elbow with nut, a 3/8" barbed tee for vacuum connection, custom machined heavy duty o2 sensor extender, complete instructions and E-Mail support also I can be reached at 607-351-6321 ask for Bill, my website is www.hydro-extra.webs.com

  8. #8
    theramsey3 Guest
    did you get a cell yet?

  9. #9
    Super Fuel FX Guest
    With all the sellers listing for him, I think that he will need a few weeks to sort through them all...

  10. #10
    theramsey3 Guest
    I would strongly recommend a dry cell if you are going to buy instead of build I have sold a few on ebay but due to financial difficulties I haven't been able to get one for myself due to the fact I am still buying everything in small quantitys hopefully soon I will be able to get the start up money I need to pay for the minimum quantity my local sheet metal shop will cut for me its not a bad price but alot more than I have right now not including gaskets and end plates or maybe some one here could get me good prices on laser cut 316L when I get on my feet I will offer a discount for forum members

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •