Hi everyone..
I just want to share a lil experiment of mine. Recently i did an experiment using :
"(1) 3 cells working in parallel, where the cell's configuration was :
-NNNNNN+ -NNNNNN+ -NNNNNN+
(2) A battery 12 Vdc and 45Ah.
(3) Caustic soda ( NaOH ) as the aditive
(4) At least 3 liters of electrolyte solution ( distilled water and NaOH ).
(5) 3mm gap per plate.
When the process began, i read 15 Amps and the voltage was steady at 12 V. Coz i was working with parallel config, it means that each cell will have 5 Amps ( 15 Amps divided by 3 cells ) and 12 Vdc each cell which means the voltage per plate was 1.7 Vdc. I got 0.1 Liter per minute.
What happened was, the temperature was rising so hot ( untill it reached 70 Celcius or 158 F ). The Current then dropped to 12 A and continued to drop untill 10 A. Still i got o.1 LPM.
The question is, What's wrong with my electrolyzer ? It should produce much HHO. My aim should be getting higher gas production ( untill 2 LPM ) and hopefully i can burn the gas safely without the risk of explosion.
Anyone please help me...