Here are some photo's of our recently designed hydrogen generator kits. These are made with high temperature pet jars with a temp. rating of -40 to +230 F with a melting point of 330F. 32 ounce and 48 ounce. The lids are made of CPVC which have a high temp. neoprene gasket under the lid. The lids have filler plugs so you can add distilled water with out having to remove the generator.
There are nine 18 ga. 316L stainless steel plates which are configured +n-n+n-n+ all of the internal hardware is 316 stainless steel, including the terminal bolts. These generators have a 100% seal and are capable of generating 1-1/4 to 1-3/4 LPM. I also have these with all the same features that screw onto any wide mouth mason jar.
All of our kits come complete with a bubbler, flashback arrestor, heavy duty zinc plated o2 extender which are custom machined, heavy duty 3/8" braided hosing, a 3/8" nutted elbow for connecting to you air intake plenum, a 3/8" tee for vacuum connection, 3/8" check valve, 40 amp. relay, 30 amp. inline fuse block with 30 amp. ATC fuse, all of your 10 gauge eyelets for terminal connections, 10 gauge spade connectors for connecting to the 40 amp. relay, wire nut,10 gauge wire, inline wire connector for power from ingnition to 40 amp. relay, amperage meter, complete detailed installation instructions come with every kit, and e-mail support .
These kits come with everything you need for a complete installation. You can visit our website @ http://hydro-extra.webs.com