Page 1 of 3 123 LastLast
Results 1 to 10 of 21

Thread: Where to find this bubbler stone?

  1. #1

    Where to find this bubbler stone?

    I found this bubbler stone at www.hhoglabs.com

    Does anybody know what it is or where it could be found? Obviously, I know what the hose barb part is, but I was hoping the air stone part may be something I could find locally.


  2. #2
    Join Date
    Mar 2009
    Location
    CT
    Posts
    361
    Gas filter

  3. #3
    Join Date
    Jul 2008
    Location
    Paso Robles, CA
    Posts
    202
    You can get just the sintered brass filter part from Auto Zone. It is in the fuel filter department for $3.50. Other auto parts stores might carry them, but I only found them at Auto Zone. You can see one in this video I posted:

    http://www.youtube.com/watch?v=n3dborjNIBE

    Good Luck!

  4. #4
    Look for the stone at bait shops, I use then to keep my minnows alive. Most bait shops have them becasue they break easy. I know bass pro shops have them.

  5. #5
    Join Date
    Aug 2008
    Location
    GA
    Posts
    1,079
    Ceramic air stones will hold up in KOH and you have a variety of sizes. also but the HHOG's brass version is a good value IMO with less back pressure

  6. #6
    Join Date
    Apr 2009
    Location
    MN
    Posts
    19
    What does it do?

  7. #7
    Join Date
    Aug 2008
    Location
    GA
    Posts
    1,079
    Quote Originally Posted by Mulenson View Post
    What does it do?
    1. Makes your bubblier safer by making the bubbles smaller. less chance of a daisy chain flashback

    2. By making the bubbles smaller, It lessens the chance of KOH or NOAH staying suspended in the HHO gases, and possibly damaging down stream metals. (personally i believe a anti splash media like a roll of plastic Gutter Guard in your bubblier works better of this 2nd goal. Or adding it in addition too.

  8. #8
    Join Date
    Jul 2008
    Posts
    1,174

    Lightbulb

    Amoeba Cell Dip Tube Bubbler


    http://www.youtube.com/watch?v=IC83XDnC4vc

    I copied this dip tube design from HHO Forums member DodgeViper. Thanks.

    Use a 1/4" barb T and make a loop with tubing connected across the top.

    Punch a lot of holes with a cork board push pin.

    Many small bubbles really help in drying the HHO and in removing the KOH.

    Works great!

    BoyntonStu

  9. #9
    Join Date
    Aug 2008
    Posts
    10
    Found this site that sells, 1/4" Sintered Bronze Silencer (for air compressors), taht is
    simuliar to the bronze gas filter, at low price...

    http://plantmaintenancedirect.com/Me..._Code=mufflers

    if link ng, go to,, plantmaintenancedirect.com and search for,, 1/4" Sintered Bronze Silencer

    PatL
    You'll never know unless you TRY !

  10. #10
    Quote Originally Posted by hhoconnection View Post
    You can get just the sintered brass filter part from Auto Zone. It is in the fuel filter department for $3.50. Other auto parts stores might carry them, but I only found them at Auto Zone. You can see one in this video I posted:

    http://www.youtube.com/watch?v=n3dborjNIBE

    Good Luck!
    for some reason I couldn't find it.. do you have the link?

    thanks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •