Originally Posted by
Havens78
I do not have the pictures of my intake injection point on this computer, I can upload those tonight. Your connection should work just fine, is it close to the throttle body intake housing? I have mine set up 2-3 inches away from the throttle body. When you measure your gas output are you measuring it in the trunk or under the hood? Is there room for a secondary bubbler in the engine compartment of your car? (just to make sure the gas is clean, may not be needed but might give you a better way to tell everything is working correctly).
I am using the mileage chip and am seeing positive results, once i build a new cell i'll hopefully see the same results with just 20 amps or less. If your producing enough gas and still no results than it might be the chip or electronics you are using. But i totally understand about the cost issue, a friend of mine installed the 773 and to date we're only getting 1.5 LPM out of it. A question to the support line about what could be causing this only got me a reply of "We don't warrant gas output of our units, (insert link to warranty)". I'll be taking that unit apart and trying to rebuild it over thanksgiving.