Results 1 to 10 of 10

Thread: pressurizing HHO

  1. #1
    Join Date
    Dec 2009
    Location
    Canton, MI
    Posts
    25

    Lightbulb pressurizing HHO

    How much pressure could a HHO dry cell hold? Does anyone know this?
    03 Ford Focus 2.0 MTX mpg 32-37 summer. 30-32 winter w/o hho
    Jesus saves.

  2. #2
    Join Date
    Nov 2009
    Posts
    103
    it all depends how your cell is made. But remember HHO can explode..
    The cell i'm working on right know seem like it could hold about 2 psi, but i wouldn't want it to. I'm sure a cell that isn't a jerry-rigged POS could hold more.
    I=V/R so R=V/I and V=I*R
    P=V*I
    (I=Amps, V=volts, P= power in watts, R=resistance in ohms)

  3. #3
    Join Date
    Aug 2008
    Location
    GA
    Posts
    1,079
    Quote Originally Posted by bergs23 View Post
    How much pressure could a HHO dry cell hold? Does anyone know this?
    You can build a cell that could hold 40 - 100 psi with no problem. But the reservoir, bubblers... that most of us use, can barely hold 5 PSI.
    When you're one step ahead of the crowd you're a genius.
    When you're two steps ahead, you're a crackpot."

  4. #4
    Join Date
    Jul 2008
    Location
    North Jersey
    Posts
    221
    HHO torches work at 15 psi and up. I'm not sure if a regulator is involved but a fire stop must be
    If you can read this, Thank a Teacher!! If you can read this in English, Thank a Soldier!!
    "A Veteran is someone who, at some point in his or her life, wrote out a blank check, payable to the United States of America, for an amount up to and including his life."

  5. #5
    Join Date
    Dec 2009
    Location
    Canton, MI
    Posts
    25
    interesting, Is anyone pressurizing hydrogen for their car?
    03 Ford Focus 2.0 MTX mpg 32-37 summer. 30-32 winter w/o hho
    Jesus saves.

  6. #6
    Join Date
    Jan 2010
    Posts
    25
    there is no need to pressurise it for your car of course, just let it flow

    So am guessing you re thinking of for a torch:

    I am planning a dual purpose rig for my older bro that doubles as a cutting torch setup for a remote location, maybe with a secondary cell for extra production without overdriving the road running one.

    He has a Lot of iron cutting to do on a boat building project he is doing using old pontoons he has. All mainly about 6mm with some 12mm sections.

    For cutting I have seen you want about 10 psi + as I understand so far:

    http://www.siamwaterflame.co.uk/html...generator.html

    though its torch tips list for 10psi - its safety cut out is set to 39psi. Seems from a photo the LCD displayed running at 31psi. This unit produces 5.83lpm of HHO

    or 15 as Boltazar mentioned - but am sure the more the merrier ~_^

    For curiosity:

    http://www.youtube.com/watch?v=GQ751...eature=related

    This CNC cutter is running at 33lpm and 7.25 - 21.7 PSI and draws 3500-4000 Watt.


    Was kinda joking/serious that my bro should mount a cutting torch to a toy truck (plenty of other options) for stable long straight cuts and less arm strain LOL

    Should be a fun project

  7. #7
    Join Date
    Oct 2009
    Location
    Lookout Mountain, Ga
    Posts
    25
    this guys pressurizes and adds air, but not for torches. he's got some intereting videos.

    http://www.youtube.com/profile?user=jdmforyou
    he explains his system in the gen 1 meshon video
    2000 ford focus zx3 2.0L Zetec, dual o2 extenders, volo-fs2. scanguage2 ; mountain driving. base ~26, now ~30mpg.

  8. #8
    Join Date
    Aug 2008
    Location
    GA
    Posts
    1,079
    Quote Originally Posted by hanglide4life View Post
    this guys pressurizes and adds air, but not for torches. he's got some intereting videos.

    http://www.youtube.com/profile?user=jdmforyou
    he explains his system in the gen 1 meshon video
    That guy has done a whole bunch of videos. But their is little to no useful information in any of his videos.

    This one seem to some up all his videos. http://www.youtube.com/profile?user=.../2/a9f86OXfJac
    "This is it,-- what it does is classified,-- you guys can figure it out of yourself,-- it ether does what it does or it doesn't.
    Oh yah and dont forget this one

    "Watch out for the Disinformation Agents" ******WARNING******** LONG TERM EXPOSER TO HHO MAY CAUSE BRAIN DAMAGE
    When you're one step ahead of the crowd you're a genius.
    When you're two steps ahead, you're a crackpot."

  9. #9
    Join Date
    Sep 2008
    Posts
    110
    Quote Originally Posted by Roland Jacques View Post
    This one seem to some up all his videos. http://www.youtube.com/profile?user=.../2/a9f86OXfJac
    "This is it,-- what it does is classified,-- you guys can figure it out of yourself,-- it ether does what it does or it doesn't.
    Oh yah and dont forget this one

    "Watch out for the Disinformation Agents" ******WARNING******** LONG TERM EXPOSER TO HHO MAY CAUSE BRAIN DAMAGE
    5000psi Yeah right at most those air tanks and paint pressure pots are probably only rated at most 200-300psi and thats pushing it. Someone who doesnt want to share freely his secrets is probably is more than likely a BS'er

  10. #10
    Join Date
    Oct 2009
    Location
    Lookout Mountain, Ga
    Posts
    25
    but with the right tank and compressor, one could reach very high psi like your normal H tank for welding. My friend also used an old scuba tank he moded to fix dozens of flat car tires.
    2000 ford focus zx3 2.0L Zetec, dual o2 extenders, volo-fs2. scanguage2 ; mountain driving. base ~26, now ~30mpg.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •