At first glimpse of all the HHO products and variations out there I was a little overwhelmed. Regretfully, I purchased the cheapest one I could find on Ebay. Lets just say I could barely get it to bubble, no matter how many amps or electrode I added.

I drive a '94 Altima and am running on 3rd cell. Previous cells we far too small and overheated too easily. The cell is about 15'' by 3'' PVC with stainless steel coil coming up from the bottom (it probably had to do with the size of the previous ones but I would occasionally have a spark in the cell and it would melt my pvc caps). My bubbler does not yet have an adjustable top but i do have small resistors on either side. For now, I have my wires grounded to the engine and hooked up to my batter with a 10amp fuse. Eventually I plan to get a longer wire and feed it through the firewall to the fuse box.

If anyone knows of something easier that would be great but, I couldn't find anything under the hood that wasn't fed power while the engine was off.

The hose is hooked up to the air intake just before reaching the intake manifold with a water catcher in between. I've heard mixed stories about having a second line to the PCV valve. I've seen places that say having a line to the PCV helps with milage and others that say it would just make my car idle high. Does anyone has any advice about the PCV?

So far, that is my setup. I'll get around to putting some pictures up. I haven't done anything with any of my sensors. MAF or O2. Any info on these sensors would be appreciated.