Hello guys,
Today I have been working with the smacks cell in my back garden. As I am using the 6 plates which they are fully working. I have added some KOH into the water, but I am having trouble with the circuits to measure the amps using with each different multimeter I have got which it's the digital and the clamp multimeter. I cannot be able to draw any voltage or amps. I have tested the battery with each of those wires, as there are the multimeter wire and the other one that come with the crocodile clips. Each of them I did up the voltage as I have got 12.50v, so I know that both wires and the battery are still working....
Right listen here, what I find it very strange is when I connected the wires from the battery to the digital multimeter then to the smacks cell and back to the battery, usually I get it working straight away without have any problems, but this time I picked a very low voltage which it's 1.20V. I have tested the wire that connected from the battery to the smacks cell without using the multimeter, so I got it working straight away without have any problems. I know that none of the wires has failed, so it must be something else. Something is fails out there. I don't know what it is, as I find this very weird but very strange act of the way that it should normally working in order.
Any suggestions?