Does anybody out there knows any anti foaming remedies for the reservoir.
Does anybody out there knows any anti foaming remedies for the reservoir.
Go to Lowes or Home Depot and get a small bottle of "SPA TIME" anti foaming agent. It only costs a few bucks. Put in a drop or two and the foaming will stop almost immediately.
1998 Explorer 4x4, 4.0
14 cell / 2 stack 6x9" drycell reactor 28%KOH dual EFIE, MAF enhancer, IAT & ECT controllers, 2.4 LPM @ 30 amps. 6.35 MMW http://reduceyourfuelbill.com.au/forum/index.php
thanks alot for the info but does this cause any problem with the koh? Will this product turn the water and plates brown. How long have you been using this stuff.
hello ihazleton, your 2 lpm with 22amps, Does that unit have a water pumping in it.
Waterbugs,
I've never seen any adverse effects from the use of Spa Time.
And no, I've never used a pump on any of my reactors.
1998 Explorer 4x4, 4.0
14 cell / 2 stack 6x9" drycell reactor 28%KOH dual EFIE, MAF enhancer, IAT & ECT controllers, 2.4 LPM @ 30 amps. 6.35 MMW http://reduceyourfuelbill.com.au/forum/index.php
I try spa time anti foaming and notice that I have to add this solution every time I restart my generator and eventually it start leaving brownish gunk in the water. Do you have this problem do you have to add this solution everytime you restart the generator.
You should not have to keep adding anti-foam solution. Maybe you bought some that is a little different than the stuff I and others have used. I know when I first stumbled onto this solution I had been trying different chemicals for my hot tub, and some of them would gunk up the water pretty bad. I would tear everything down, give it a good cleaning and start over.
On another note, where around LA do you live?
Waterbugs,
What concentration of KOH are you using? The higher the percentage (up to 28%), the less foam you will get. The electrolyte will also remain clear.
1998 Explorer 4x4, 4.0
14 cell / 2 stack 6x9" drycell reactor 28%KOH dual EFIE, MAF enhancer, IAT & ECT controllers, 2.4 LPM @ 30 amps. 6.35 MMW http://reduceyourfuelbill.com.au/forum/index.php
So I have to break everthing down to start all over again when I just put them together. I live in San Gabriel and work in Sherman Oak. thanks for the info anyway.