HI,
Here is my setup "configuration test"
1 dry-cell "The Liberator Industries"
16 plates approx. 6" * 6" , SS316 --> -NNNN+NNNN-NNNN+
Gasket 3/32" epdm
Production claimed by the seller: 8.35 MMW
My electrolyse is: 10 % NaOH by mass
300g NaOH (9 Tbsp) and 2700 ml distilled water ("boiling")
Voltage: From 12.4 to 14.2 volts (from my car battery)
Voltage between each plate: approx. 2.81 volts
Bubbler: water
With this setup, my production is just 0.5 LPM and the amp reached to 25-27 amp
What's wrong ?
Thanks in advance