Originally Posted by
koya1893
Mike,
One thing I've experienced with imports is, installed the system, adjust the EFIE to the base line mv. He has a narrow band system: 350mv on the front and 200 rear. Run the system the way half tank, use an OBDII re-set tool or disconnect neg batt and re-set the ECU. Do that several times as he or she drives the vehicle on their daily drive routine route. The ECU needs to be re-set at min 3 times, Then set the front O2 to 400mv and drive that way for two to three tank.
Oh yeah, the 3.2 will require the min LPM anymore it will throw codes and set the CEL of.