Results 1 to 3 of 3

Thread: 25 lpm?!

  1. #1

    25 lpm?!

    Is this a bunch of BS?

    25LPM at 18~19A on 12~24V....WTF?

    http://www.marchlabs.com/product_p/supernova.htm

    Watch the video and please tell me this is BS or?
    2000 Toyota Camry CE 4cyl 2.2L (CA emissions)
    168K miles

  2. #2
    Join Date
    Jul 2008
    Location
    Paso Robles, CA
    Posts
    202
    You gotta read a little closer. It says they have developed a power module to run at 12-24v. In the video they are showing 15-20 LPM running on 110v at 18-19 amps, not 12-24v.

  3. #3
    Join Date
    Nov 2009
    Posts
    1,418
    This is another little misleading video. His demo is showing about 12 seconds per liter. That is only 5 liters per minute. 19.2 amps and 110 V is 422 watts per liter. Did I miss something? 19.2 x 110 = 2112 / 5 = 422.4 watts per liter. Use the timer on the video and you will find it is about 6 seconds per 1/2 liter or 12 seconds per liter. That is 5 liters per minute which is what it looks like too. I am sure if he turned it up he could produce much more but it would start pumping the water out of the reactor and the reservoir at 15 to 20 lpm and stuff would be jumping around on the table especially through the small 3/8 tube. Almost any reactor is more efficient than this demo. Maybe it needed to warm up or ??? To make 20 lpm he needs to fill the 500 ml bottle in 1.5 seconds and would fly out of the container. It at least gives you an idea what 5 lpm looks like.
    "Democracy is two wolves and a lamb deciding what to have for dinner. Liberty is a well-armed lamb."

    ONE Liter per minute per 10 amps which just isn't possible Ha Ha .

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •