Results 1 to 4 of 4

Thread: Help me pls

  1. #1
    Join Date
    Oct 2011
    Posts
    1

    Help me pls

    Can any one help me in giving the actual Plate design
    Pring and cut size
    Including the Gage and Thickness etc
    thanks
    Joy

  2. #2
    Join Date
    Oct 2009
    Location
    Stanfordville, NY
    Posts
    799
    Do research. Everything you need to know is posted in here. All you need to do is look.
    1998 Explorer 4x4, 4.0
    14 cell / 2 stack 6x9" drycell reactor 28%KOH dual EFIE, MAF enhancer, IAT & ECT controllers, 2.4 LPM @ 30 amps. 6.35 MMW http://reduceyourfuelbill.com.au/forum/index.php

  3. #3
    Join Date
    Nov 2009
    Posts
    1,418
    Use the search feature on this forum which should make your job much easier. Try different names for the same thing. All the info is here in more than one spot. When you think you know it all you just have not looked enough. LOL
    "Democracy is two wolves and a lamb deciding what to have for dinner. Liberty is a well-armed lamb."

    ONE Liter per minute per 10 amps which just isn't possible Ha Ha .

  4. #4
    Join Date
    Oct 2011
    Posts
    5

    Arrow

    cell #Tube with one mm_to_1.3 spacing and 10 cm long, Pwm i use Lowton circuit >>>>http://2.bp.blogspot.com/_fk8PGTQCda...Lowton555h.jpg >> But i don´t use the Bifilar 100 tuns coil and straight to the cell (important) my setup is from the drain (D)of the transistor i have a blue wire of the transformer the read on the transformer to the + on pwm circuit.The transformer must not be any transformer, The ideal transformer have on it´s primary 200 turns secondary 600-900 turns flat core! and handle high frequency´s exemple>>>> http://www.jensen-transformers.com/a...%20Chapter.pdf flat core .Then! from the secondary of the (evil) Transformer comes a diode hv high switching diode then from the diode -->[-- 100 to 300 turns 22 swg wire on ferrite-rod core 15 cm from there to + on the cell then from - on the cell to another 100-300 or variable coil,from there to other end of transformer lets call it minus...

    Perfect setup


    Now making HHO gas,but now i want to make more of it not in the sense in volume but i the sense of power,easy right? now i make another cell same setup.... but in that cell won´t be water only inlet for HHO, From the primary to secondary no water cell inside that cell i have laser light .End of dyer'y Diaz@internet.is



    Now making hho with 7 volt and 0.008 amps , Waiting for the perfect transform and nothing to spice the water

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •