Originally Posted by
danser75
I know I don't need all 20 I actually would need 15. Also I found 1/4 inch acrylic and for those 2 pieces (cut, holes drilled for me) would be 45. the holes were the expensive part but they said with no drill press, it was unlikely that i would be able to drill the pieces myself without cracking one. Also is this true? Has anyone else drilled the acrylic plates themselves?
Don't use acrylic! Also, 1/4" is way too thin. You need to use 3/4" HDPE.
But one other question I had was the 4 inches per amp is that 4 inches for both anode and cathode, or is that 2 inches of anode and 2 inches of cathode?