Guys hi from greece.
As you just see i am a newbie and coming to this fora for the free knowledge..
I started reading some days ago and i seeinmg a lot of infos. But there are some things i wou;d like to hear it to get them cleared for me.
My english are not goot so i apologize dor that and i hope that you ll get the meaning of what i am trying to learn.
So first things first.
Catalyte . I saw that many of you use the KOH and not baking soda . I can undersatnd that it is better cause it doesnt leave and garbage in the plates or wet cell and has the ability to produce much easier ( temps and amperes) hydrogen. Is that right ? Did i get the advantages of the KOH ?
I am getting a lot of brown water in the generator. Is this has something to do with the baking soda i am using ?
If yes then i want to use it but i am afraid. See there are some kids walking around the house and in the garage and i have heard that if KOH come on the human body it is certain that it will hurt a lot. ANd on the other hand i am not that carefull when i am working.
So is this really bad ? When it comes to yourself what do you prefer and why ?
Filter
Which is the best way to filter the hydrogen . The vinegar solution helps ? I am concernig about other chemicals too. Meaning that i am using some two components epoxy from permatex and i am thinking that maybe the exhaust gas concludes more than hho. In this case which is the best contain for a filter ?
PWM.
when i come to this it really heart me . I am trying to find any plans for constructiong a cheap pwm . I already found a guy from this forum with some tube videos and a site with some plans . I send all of them to a friend who deals with electrics electronics cause i dont have any idea in any of these two. The problem is that the plans i ve found are some kind of automatic keeping the amps and temp on what you ve "told" it to.
I would prefer to have a button or something so i lll be able to play during the production of hho. Do you have something in mind ?
And last but not least: Cells and generators
.
I ve constructed until now two generators; one wet cell testing and producind a small amount of hydrogen at >4amps and another one dry cell which is ready to be tested.
I cant say which one is better than other i think that both of them have +- .
But there are some things that i cant understand. The neutral plates that almost everybody use helping only on the temp issues? Also when it come to volts per plate do i have to divide all of the plates ( negaticve neutral possitiv ) or only the pos and neg ?
What the thickness of the plates have to do with the generator production? I prefer thick sheets as 1.5 mm and more ( gauge 16 - 11 ). Except the weight and volume problems are there any others with that ?
Finally i like to ask a kind of silly question. Are you satisfied by going in the chapter hho? I am trying to tell that there is a lot of study a lot of hours on practice and etc. When it comes to an end the results leaves you happy enough to keep on going or you have ur thoghts ?
apologies for the big post; happy to be in this community not becasue of the hydrogen but because of the people who likes to seek.
Be well guys,
Pavlos