Results 1 to 10 of 10

Thread: special 316 stainless

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Mar 2012
    Posts
    26

    special 316 stainless

    I have 100+ plates out of a hydrogen fuel cell (hydrogen in electric and water out) these plates are .050 in thick 18 guage (quite robust) ..but what makes these nice is then have groves in them increasing surface area. these groves. ...Iceguy42000@yahoo.com.

  2. #2
    Join Date
    Mar 2012
    Posts
    26
    Front side...

  3. #3
    Join Date
    Mar 2012
    Posts
    26

  4. #4
    Join Date
    Mar 2012
    Posts
    26
    Back side... I think this picture shows the easily removable fine ss screen At the bottom of this pic it clearly shows the "feeler guage" like flap of SS that holds the screen in place. the screen was used to keep the PEM(proton exchange membrane) from closing off the channels...I have listed these on e-bay...Item number: 251064966493

  5. #5
    Join Date
    Mar 2012
    Posts
    26
    outside edges 8 1/8"X6 1/2" If you look closely at the first picture you will notice the groves are NOT machined. they were either blasted with sand or etched as the groves are very rough increasing the surface area even more....

  6. #6
    Join Date
    Aug 2008
    Location
    Dallas, TX
    Posts
    490
    Selling them all or would you sell just 8?

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •