I've had people ask me why and for what reason I pump water through my cell!
1; I get more production .
2; I get better quality production.
3; And what I have now is a cell that is as clean as when I first began using it! No build up, no wear on the metal, no damage. And still NO electrolytes.

I use my pump and tank for more then just the cell however. The system is the same as if it were using gasoline. The pump runs if the key is on, feeding injector assemblies and the regulator feeds the cell before the water is returned to the tank. The only two materials used in the water system are stainless and vinyl tubing, outside of the fuel pump. The injector assemblies do have some brass and aluminum. The system does have filters in place and have had no problem.

Also one reason for this thread was to tell of the reason I believe I have little trouble with my cell. I feel that pumping water through the cell and not allowing it to have sediment build up by sitting at the lowest place in the system is key to it staying spotless.