+ Reply to Thread
Results 1 to 2 of 2

Thread: running 2 hp 4 stroke

  1. #1

    Default running 2 hp 4 stroke

    trying to start up with hho and it back fires to the flame arrester
    and will not start
    do i run with gas then add hho and turn off the gas

  2. Default

    Your problem is most likely the waste spark happening during the exhaust stroke or the spark is to advanced. What happens is that the intake opens before the end of the exhaust stroke and both valves are open for a short time. That waste spark is possibly igniting the HHO. You must have only one spark every second revolution of the crank. Single cylinder small engines spark every revolution of the crank because it is the cheapest way to get a spark. You will also need to change the timing of the spark to after TDC.
    "Democracy is two wolves and a lamb deciding what to have for dinner. Liberty is a well-armed lamb."

    ONE Liter per minute per 10 amps which just isn't possible Ha Ha .

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts