Has anyone ever tried using Stainless Steel Ball Bearings as the negative and a stainless pipe as the positive.
Figure a piece of PVC in the middle a 1/2" Stainless Steel pipe outside that a 3/4" stainless pipe with holes drilled. Then fill the PVC pipe with ball bearings attaching stainless wire to a few as they fill the outside of the pipe. All the bearings would be grounded because they would be touching. The area is three times that of a single plate.
If you took the neutral pipe to the top you could separate the hydrogen from the oxygen.
Any thoughts. Like I said this is just an idea.
6mm to 8MM ball bearings.