I am producing 17 plate (16 cell) electrodes, built to the following specs.

100 % non-magnetic 304 grade stainless steel

Plate thickness: 0.039 (1 mm)

Plate gap: 0.0445 (just slightly over 1.1 mm gap)

5 ea. Polarized plates 6.5" by 3", with one corner cut away 3/4" by 2" (removed part (angle cut) is 1.25" by 2", to allow for bolting of plates)

12 ea. Neutral plates 4.75" by 3".

Assembled plate design offers a total surface area of 491.5 square inches or 3.413 sq ft.

Each assembly, comes with four nylon nuts / bolts, and 64 ea. 1 mm nylon spacer washers.

Using 4 nylon bolts, one near each corner, we better maintain spacing standards, and can hold closer gap tollerance, for more production, and less heat.

Plates are designed to be assembled +NNN-NNN+NNN-NNN+

This assembly provides for a 12 volt input, and a 4 volt exiting current, allowing for two volt (water induction) differences, at each neutral plate, to provide for the 12 volt to 4 volt exiting current.

These assemblies will be available in wholesale lots of 100 units each, for $32.00 per unit, plus shipping cost.
Assemblies will come in a knockdown format, ready to be cross sanded, and assembled.

Stainless steel straps for polar connections, and stainless steel bolts are provided to cross connect similar pole plates.

Currently, 1,000 units are being manufactured, and we can produce more, when needed.

Larger discounts can be arranged, for larger volume orders.

These units will take an approximate 2 months to manufacture, and we ask only for parties interested, in wholesale bulk inventory, to contact us.

Note that absolutely no money is due, until we have products in hand.

This is a limited time offer, to determine wholesale interest.

Once products are on hand, only those who reserve products now, will qualify for these low prices.

Note also, that we can also mass produce other HHO items, in bulk (electrical in design, such as PWM, Coils, or MAP Enhances, or metal objects sich as O2 extenders).

E-mail DandDHorstead@comcast.net if interested.

I can send pictures, if needed.