Page 4 of 9 FirstFirst ... 23456 ... LastLast
Results 31 to 40 of 87

Thread: Which is the best plate configuration

  1. #31
    Join Date
    Sep 2008
    Location
    tuscaloosa,al
    Posts
    177
    hmm, speaking of glass wrap.
    a person could fiberglass his setup after finding the optimum design.
    1982 MB 300D Turbo Diesel 90%WVO/10%RUG + additives blend. $.50/gal
    don't know what MPG is, probly low 20s

  2. #32
    THEhomelessONE Guest
    lol im a bit lost, what are we wrapping here?
    because im thinking the whole plastic canister part, w/e its called

  3. #33
    Join Date
    Aug 2008
    Location
    Southern Alberta Canada
    Posts
    483
    Quote Originally Posted by THEhomelessONE View Post
    lol im a bit lost, what are we wrapping here?
    because im thinking the whole plastic canister part, w/e its called
    u want to wrap the stainless steel CELL that makes the HHO

    here's a pic of what the current does if u do not wrap a cell

    That is why u want to wrap with something like liquid electrical tape, or something that blocks current.


    Come to the Darkside - We have Cookies
    And lots of KOH (16 LBS)

    Not currently running HHO.
    I dont run HHO during winter.

  4. #34
    THEhomelessONE Guest
    thankyou very much!! saved me some time i would have wasted in the future lol

  5. #35
    Join Date
    Sep 2008
    Location
    tuscaloosa,al
    Posts
    177
    thats why I am thinking that dry is the way to go.

    we should be able to come up with a rough lpm to Sq Inch value.
    1982 MB 300D Turbo Diesel 90%WVO/10%RUG + additives blend. $.50/gal
    don't know what MPG is, probly low 20s

  6. #36
    Join Date
    Sep 2008
    Posts
    110
    What about :

    -+-S/S wool-+-S/S wool-+-

    Use 316L flat plate for positive and perforated plate sandwiched with stainless steel wool for negative

  7. #37
    Join Date
    Aug 2008
    Location
    Southern Alberta Canada
    Posts
    483
    Quote Originally Posted by hhonewbie View Post
    What about :

    -+-S/S wool-+-S/S wool-+-

    Use 316L flat plate for positive and perforated plate sandwiched with stainless steel wool for negative

    I dont know about a sandwich, but why perforated, u need as much sq" , and perforating tkes some sq" away.
    Come to the Darkside - We have Cookies
    And lots of KOH (16 LBS)

    Not currently running HHO.
    I dont run HHO during winter.

  8. #38
    JonDoh Guest
    Quote Originally Posted by hhonewbie View Post
    What about :

    -+-S/S wool-+-S/S wool-+-

    Use 316L flat plate for positive and perforated plate sandwiched with stainless steel wool for negative
    A friend did the SS wool in an SS tube. It cranked out some HHO gas but the amps were running wildly!

    Looks likethe best configs are:

    +nnn-nnn+nnn-nnn+
    +nnnn-nnnn+nnnn-nnnn+

    DRY CELLS!

  9. #39
    Join Date
    Aug 2008
    Location
    Southern Alberta Canada
    Posts
    483
    ok have tried

    1 = -+ works ok but over 160 Degrees at 21 amps - get about 0.7 LPM
    2 = -N+ works near same as one
    3 = -NN+ and 20 amp - 120 Deg and 1.4 LPM === at 28A - 1.8 LPM
    4 = -NNNNN++NNNNN- 30A - 0.8 LPM
    What happened to #4??????? why so low production??

    next i want to try #4 split into -NNNNN+ to see what happens.
    Come to the Darkside - We have Cookies
    And lots of KOH (16 LBS)

    Not currently running HHO.
    I dont run HHO during winter.

  10. #40
    donnylynn Guest
    Quote Originally Posted by mytoyotasucks View Post
    ok have tried

    1 = -+ works ok but over 160 Degrees at 21 amps - get about 0.7 LPM
    2 = -N+ works near same as one
    3 = -NN+ and 20 amp - 120 Deg and 1.4 LPM === at 28A - 1.8 LPM
    4 = -NNNNN++NNNNN- 30A - 0.8 LPM
    What happened to #4??????? why so low production??

    next i want to try #4 split into -NNNNN+ to see what happens.
    What voltage are you using? It looks like #4 dropped below the threshold voltage needed to produce.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •